• Upgraded to hex wrench head, not weak allen wrench. All plugs use same 10MM hex head. Significantly improved magnet strength over stock drain plugs. This plug is for the fill and drain plug location on the rear transmission for approved fitments above.
• HIGH TEMPERATURE NEODYMIUM MAGNET – Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM STAINLESS STEEL – The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• PROMISED PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters. If you're not 100% satisfied with its quality or performance, return your drain plug for a full refund!
• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plugs is needed high temperature o-ring.

Our Votex drain plugs are proudly MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands of the VOTEX crew that craft each individual drain plug. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that we supply drain plugs manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Our drain plug is designed to stout a lasting strength so it's the last drain plug you will ever need to purchase. We include a high temperature o-ring; Yes also MADE IN USA.

What makes our drain plug unique outside its flawless craftsmanship and top-notch materials is the heart of it, a HIGH TEMPERATURE NEODYMIUM MAGNET. Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. The VOTEX drain plug magnet will operate in temperatures to 150°C or 302°F, this is higher than most standard magnets which stop working at 175°F. A quality motor oil will tolerate oil temperatures up to 250 degrees, but starts breaking down once you reach 275 degrees. The operating temperature for engine oil is between 194 to 230°F, so our magnet will work in temperatures far past that of engine oil.

Neodymium magnets are one of the strongest magnets available on the planet, and we use one of the strongest grade versions available. Our magnet has the strength to hold weights over 2.2lbs! This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life. Loose metal debris in your engine oil can slowly start to wear on the internals of your engine.

One must note that the drain plug market has a plethora of options, most of which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Aluminum has no place as the material for a drain plug. Our goal with the complete design of our plug is to provide one with the highest quality standard, that starts with using a metal that will be strong enough to last for years. Our 304 stainless steel is sourced from here in the states, promising not to be a weak recycled material often found in foreign metals. 

Our magnet will extract the small metal particles that are too fine for oil filters to catch. Oil filters are designed to catch particles larger than 35 microns, our plug will catch the finer particles your filter can not. It will also capture larger metal shavings that plug oil filters.

LEGAL DISCLAIMER: Bridgewood INC is not liable for damage incurred due to incorrectly installed drain plugs. Inspect magnets prior to install to make sure there is no damage caused from improper handling in transit. When installing our drain plugs it is essential to make sure one consults their owner/repair manual to obtain the proper torque specifications. Note: Check to make sure there is proper clearance for the drain plug, slowly turn over by hand the engine or drive gear making sure there is no contact with internal components. Check your application for usage. Drain plug may differ from the factory OEM drain plug. Install plug at your discretion.